What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 20.06.2025 01:22

These are simplified answers to the original question, and does not change anything I wrote above.
This is where the MOV conducts again, and dissipated the energy.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
but I think this circuit , shows a few more pieces.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is 'the assistant's answer'
What does a fuse do?
There are two important concepts here.
Here is a simplified AC power diagram.
Why do people stop working towards achieving their dreams?
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
There are three different concepts here that are getting confused.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Why do girls in Indian top colleges wear shorts?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
nine
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
What is lightning?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
(Dc diagram shown, AC is similar).
Are landlords allowed to make unreasonable requests?
At least they know the answer if they wanted it.
A circuit breaker is similar, but is resettable.
He then asserts :
United Airlines Flight Attendants Lose Legal Battle Over ‘Reprehensible’ Sickness Policy - PYOK
In schematic diagrams this is the symbol for a fuse:
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
but this device (an Inductor) … impedes the rapid changes in the current.
Galaxy Z Fold 7, Flip 7 to get stunning visual upgrade with S25-like wallpaper glow - Sammy Fans
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Now when you have a certain ac resistance, then a current flows in a loop.
For this case there are devices called Metal oxide varistors (MOV).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
It also is a device that limits the change in current flow.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Have you ever been forced to dress like a girl?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Because the load is inductive, the current lags the voltage.(by a bit).
Do women like watching men sucking men?
[old diagram got deleted by accident]
The third is lightning and “how it gets conducted into a home.”
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Why are white women so overly emotional?
Barnstars:
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
I post the exact comment here.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
2024–10–10[John johnson John Johnson ]
what exactly is a ‘surge’ protector?
A fuse is a non-resetable over current circuit protector.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
eight
so, what happens?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
It seems Mohan does not understand the difference between a comment and an Answer.
This device then solves the entire problem.
a photo is worth a thousand words.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
One
Edit 2024–10.
the problem then depends on "how fast does the fuse operate?".
[image of Common-mode choke]
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
He then describes the function of a fuse.
He then describes Rainy Season and Lightning.
One is “what exactly is in a ‘surge protector’ ? ”
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
At one ohm, the resistor has a maximum of 1 watt power.
So, the voltage could go up to 500 volts, and the fuse will not open up.
But… the neutral is now “floating” because of the 1 ohm resistance.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
An AC voltage/ current source, and an ac inductive load.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Upvotes:
The bolt then partially travels down the line to your home.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
The MOV will conduct when the voltage exceeds 50% of line voltage.
The other is “what does a “fuse” do?”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This one hit behind the barn.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
First Sentence:
But it can get overloaded, and no longer works.
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–10–16 [ OO OLAOYE OYEBODE ]